Skip to content
Trapezeâ„¢ Bar Wall Mount Brackets
Description
Sold as a top crossbar and bottom crossbar set. Steel eyebolts are included for top crossbars Strong and lightweight Very easy to use Extremely economical. Clear satin anodized finish Black end caps Ships bulk packed Top Bar of set is 2" longer than Bottom Bar ( An additional 1" on each end, from the endcap to the eyebolt / nut) Steel eyebolts are included for top crossbars Simply hem banners top and bottom for aluminum tubes Multiple section units connect with solid aluminum turned bushings Aluminum screw together crossbars / screw together aluminum hangbars, made to order, custom sizes available Standard Eyebolt Configuration - Eyebolts on top of bar. ​ Side Eyebolt Configuration - Eyebolts on ends of bar. Specify -SD for Side Eyebolts. Both poles are same length. Same cost as standard configuration. Note: The Side Eyebolt configuration isn’t appropriate for larger sized units BP09, BP10, BP12, BP15 or BP20. Hanging hardware will need to be purchased separately Trapeze bars are very popular banner hanging hardware. This banner hanging system can be used on walls (with available brackets) or hung from ceilings Tube Sections and Additional Eyebolts * Models BP01 thru BP08 are Single Section Tubes * Models BP09 thru BP20 are Multiple Section Tubes * Models BP11 and BP13 have 3rd Eyebolt in center (Banner notch for graphic required). * Models 96" and longer will be in 2 sections BABY TRAPEZE BAR WIRE SETS 3/16" diameter steel wire. Tops have loops at each end. Bottoms are straight cut. CUSTOM SIZES AVAILABLE Sizes, diameters and end caps can be customized. We recommend getting samples and fully testing these products for your application. Purchaser determines suitability of all product usage and assumes all risk & liability. Neither the seller nor the manufacturer shall be held liable for any injury, loss or damage from use of such product.
More Information
Templates/Instructions
Product Specifications
Artwork Guideline
Accepted File Formats
• Adobe Illustrator CC (or earlier) - .ai or .eps
• Adobe Photoshop CC (or earlier) - .psd or .tif
1. Photoshop files should be 100-120dpi at full output size.
2. Do not embed color profiles.
3. Provide a layered file.
4. When using stock photography images, be sure to purchase the highest resolution version that your budget will allow.
5. We use CMYK printers to create these graphics. 100% reproduction of defined colors is not possible. Differences between colors in the printed and original file can occur at many different stages. Variations in color or shading are often a result of viewing on un-calibrated equipment (monitors, printers, etc). Colors will often appear different when viewed on two different monitors or output devices. Without accurate color information, we have no way of ensuring that expected colors will be achieved.
6. Indicate Pantone Values for all critical colors.
7. An e-proof is provided within 48 hours of artwork approval.
Process
1. Artwork should be submitted the same day the order has been placed to avoid delays.
2. After receiving your file, it will be reviewed within 24 hours for printing requirements. If the file does not meet all necessary requirements, you will be contacted by a representative.
3. If corrections are required, you may make these changes yourself and resubmit the file or choose to have JW Displays make the corrections (if we are able to do so).
4. After the file has been approved we will send a proof for your approval. We will proceed with production/printing only after the proof is approved with a hand signature.
5. Production lead time starts after proof has been approved by the customer.
6. Shipping time starts after production time.
Artwork
1. Please indicate any special positioning requirements.
2. If using Illustrator convert all fonts to outlines.
3. If using Photoshop rasterize all fonts.
4. If matching Pantone colors please provide a layered file. This allows us to make minor color corrections if necessary.
5. Only send files relevant for output.
6. Art will not be approved unless submitted in our provided template(s). All templates are found under the guidelines page for each product (If one is missing please let us know).
7. File color mode must be CMYK.
8. If using Illustrator embed all images.
9. Hard proofs available for $50 (will add time to the in hand date). If you make changes to your file after the proof is sent, there is a $50 charge (per proof) thereafter.
10. Due to variations in output and viewing devices, we are unable to accept complaints about color variations unless all color matching guidelines have been followed.
Submission
1. Please send all files and folders using: https://jwdisplays.wetransfer.com.
2. Files must be named using your order number (ex: 16001001). You should have received your order number when your order was placed.
3. JW Displays will not address and is not responsible for delays due to improperly named files.
Unable to upload the Artwork?
If you are unable to upload your artwork, feel free to send artwork files via USB drive. Please write your order number on the drive and shipping envelope (JW Displays will not be responsible for returning any USB drives, unless you supply us with a self addressed envelope).
Send to: 822 A1A N., Suite 310, Ponte Vedra Beach, FL 32082.